Shanghai Metal Corporation is a leading automatic water supply Air Filter Regulator manufacturer and supplier.
The compressed air from the inlet rotates strongly through the gap in the tangential direction of the deflector, and the liquid water and solid impurities are thrown to the inner wall of the water cup by centrifugal action, and then flow to the bottom. Compressed air with liquid oil and water and impurities removed The tubular power in the air can pass through a 5μm filter element. The baffle can prevent the lower liquid oil from being rolled back into the airflow. The filter element has metal mesh type, sintered type and fiber aggregation type. Sintered types include copper bead sintering, resin sintering and ceramic sintering. The surface and the inside of the sintered copper bead filter element are both resin-based and man-made fiber-based materials. The metal mesh knowledge surface integrates the filtering function.
If you want to know more about our Air Filter Regulator please feel free to contact us, we will reply you within 24 hours.
Type: According to the drainage method of the filter, there is a manual drainage type. The automatic drainage type has a normally open type and a normally closed type according to the drainage state when there is no air pressure.
According to the drainage method of the filter, there is a manual drainage type. The automatic drainage type has a normally open type and a normally closed type according to the drainage state when there is no air pressure.
It removes solid impurities, water droplets and dirty oil droplets in the compressed air, but cannot remove gaseous oil and water.
According to the air quality requirements to choose the filtration accuracy. The filter specification is selected according to the maximum flow rate through the filter and the maximum pressure drop allowed at both ends. Then select other functions of the filter, such as whether to automatically drain. The water cup can be a nylon cup or a metal cup, and the metal cup can also be equipped with a level gauge, and the form of a drain pipe.
1) Before assembling, fully blow off the chips, dust, etc. in the piping to prevent the fragments of the sealing material from mixing.
2) The import and export direction should not be installed in the reverse direction, and the installation should be vertical with the water cup downward.
3) Do not install near the air compressor. It should be installed near the gas device.
4) Drain regularly, and the water level shall not exceed the baffle.
5) The filter element should be cleaned or replaced regularly. To clean the filter element, use a neutral detergent.
Rolled Cople for pipe