1. Diameter Range‌: 1 mm to 10 mm (or customized )
2. Length‌: Standard: 100 mm, 200 mm, 300 mm; custom lengths available upon request
3. Tolerance‌: ±0.02 mm (for diameters ≤5 mm); ±0.05 mm (for diameters >5 mm)
4.‌Plating Thickness‌: 0.1–2.0 mg/cm² (equivalent to 0.1–2 μm) — optimized for catalytic efficiency and cost balance
5.Standards Compliance‌:
ASTM B265 (Titanium and Titanium Alloy Strip, Sheet, and Plate)
ISO 13779-2 (Implantable materials — Titanium and titanium alloys)
IEC 62282-2 (Fuel cell technologies — Performance test methods)

1. High ‌Electrical Conductivity
2. Good ‌Corrosion Resistance
3. Good ‌Thermal Conductivity

1. Electrolysis Systems
2. ‌Fuel Cells
3. Chemical Processing
4. Medical Devices